31 / 38
NanoMat 2018
Nano Research & Applications
ISSN: 2471-9838
Page 57
April 26-27, 2018
Rome, Italy
17
th
Edition of International Conference on
Emerging Trends in
Materials Science and
Nanotechnology
T
itaniumdioxide nanoparticles are used for variant applications
which can be well chosen by size, thermal and electrical
properties. The TiO
2
nanoparticles are not new for photo catalytic
activity, in degrading organic contaminants and germs, making
of cosmetic products and paper industries. Titanium dioxide
nanoparticles are prepared by different techniques in which sol
gel is most used. The sol-gel synthesis method of nano TiO
2
can be through different molar ratio of TTIP: ethanol: distilled
water. Characterization of TiO
2
nanoparticles are done by x-ray
diffraction analysis, UV–Vis spectroscopy, FTIR and FESEM
(with EDS). The average crystalline size of TiO
2
nanoparticle is
obtained value of 4.5 nm by XRD. Surface morphological studies
have been concluded from SEM images. FT-IR peaks of Ti-O bond
were observed around 630-770 cm-1 for both samples. Electronic
energy band gap of TiO
2
nanoparticles was observed 3.149 eV
and 3.293 eV in respect to one and the other sample. A mixture
of both brookite and the small amount of anatase form of TiO
2
nanoparticle has been found in the couple of samples nano TiO
2
.
Recent Publications
1. Suchita Chaudhary, R K Tak and R K Duchaniya (2017)
Corrosion inhibition of mild steel in 0.5N H2SO4
solution by
Tribulus terrestris
(Fruit) extract. Journal
of Surface Science and Technology 33(1-2):63.
2. Kamlesh Verma, Ravi Agarwal, R K Duchaniya and
Ramvir Singh (2016) Measurement and prediction
of thermal conductivity of nanofluid containing
TiO
2
nanoparticles. Journal of Nanoscience and
Nanotechnology DOI:10.1166/jnn.2016.12584.
3. Komal Yadav and Vibha Uttam (2016) Study of
corrosion behavior of Ni-P-TiO
2
nanocomposite
coating on mild steel deposited by electroless
deposition process. Journal of Materials Science and
Surface Engineering 4:410-414.
4. Vibha Uttam, Parul Yadav and R K Duchaniya (2016)
Characterization Study of Ni-P-TiO
2
nanocomposite
coating on mild steel by electroless plating method.
Journal of materials science and surface engineering
4:432-435.
5. Ravi Agarwal, Kamlesh Verma, Narendra Kumar
Agarwal, Rajendra Kumar Duchaniya and Ramvir
Singh (2016) Synthesis, characterization, thermal
conductivity and sensitivity of CuO nanofluid. Applied
Thermal Engineering 102:1024-1036.
Biography
R K Duchaniya has his expertise in Nanomaterials, Engineering Materials,
Corrosion and Surface Coatings. He has published 32 papers in national and
international journals and conferences. He has expertise in the field of nano
composite which can be used for solar cell. His work in the field of Elec-
troless Plating Method is considerable for improving surface and corrosion
resistance properties of materials by developing nano-composite coating
on materials. He has developed a different field related to melt coolability
of materials which can be used in nuclear reactor. He built collaboration of
MNIT Jaipur with different institutes and research organizations.
rkduchaniya.meta@mnit.acinSynthesis and characterization of TiO2 nanoparticles by sol-gel
method
R K Duchaniya
1
and
Niresh Kumari Choudhary
2
1
Malaviya National Institute of Technology, India
2
University of Rajasthan, India
R K Duchaniya et al., Nano Res Appl, Volume:4
DOI: 10.21767/2471-9838-C1-008