Nano Research & Applications

Microstructure characterization and evaluation of mechanical properties for friction welded En-24 alloy steel

EuroSciCon Conference on Nanotechnology & Smart Materials
October 04 -06 ,2018 Amsterdam , Netherlands

Vijay Gaikwad, Vijay Hiwarkar, Vinayak Pawar and Rajkumar Singh

KCTI-Bharat Forge Ltd, India Defence Institute of Advance Technology, India

Posters & Accepted Abstracts: Nano Res Appl

DOI: 10.21767/2471-9838-C6-025

Abstract

Continuous-drive friction welding is performed on EN-24 steel rods in the present study. The effect of post-weld heat treatment on microstructure and mechanical properties of the as-welded rods is examined with the particular focus on three different regions of weldment such as weld interface (WI), heat affected zone (HAZ), and unaffected base zone; and the results are compared with that of base metal. The microstructural characterization at WI and HAZ revealed martensitic structure and fine pearlite and ferrite respectively, in as-welded samples whereas it changes after post weld heat treatment (PWHT) to tempered martensite and coarse pearlite with ferrite, respectively. Martensitic structure at WI of as-welded samples imparts high hardness at the cost of low ductility while tempered martensite at WI of PWHT samples causes substantial decrease in hardness with improved ductility. However tensile strength of weld joint is achieved nearly equal to that of base metal.

Biography

E-mail: