Optimization of Electro coagulation on Removal of Wastewater Pollutants

In this work the performance of electro coagulation (EC) process was investigated and optimized under different operational conditions for the best removal of wastewater contaminants such as Nitrate, total hardness, Calcium and Magnesium. Samples were obtained from Gaza Wastewater Treatment Plant (GWWTP). Under the optimal condition (pH=7.45, inter-electrode spacing=1 cm, operating time=40 minutes and current density=3.18 mA/cm2), the results showed that the removal efficiency of total hardness, Calcium, Magnesium, Nitrate were 94.6%, 93.3%, 95.2% and 70.9% respectively by using stainless steel electrodes, while for aluminium electrodes the results were 92.83%, 93.33%, 92.30%, 50.43% respectively. For Iron electrodes, the removal efficiencies of contaminants were 87.84%, 88%, 87.64%, 57.26% respectively. In addition, the experimental results also showed that the effluent wastewater was very clear, odourless and its quality is fit for reuse.

Author(s): Mazen Hamada, Nasser Abu Ghalwa, Nader B. Farhat, Khamis Al Mahllawi and Najma Jamee

Abstract | PDF

Share This Article